Basement - Haglofs L.I.M Proof Pants

Haglofs L.I.M Proof 2.5 Layer Fabric / 10,000mm HH, 20,000 MVTR
Weighs 180g (Medium size)
Code: AW14710
  • Now £53.99
  • (FREE UK & EU Delivery)
+ In Stock Now | Usually dispatched within 24 hours

Haglofs L.I.M Proof PantsHaglofs L.I.M Proof pants are all about protection and minimal weight, there are no zips or pockets or fly, just a protective waterproof layer.

Haglofs says:  Ultra minimalistic, packable and super lightweight trekking shell pant made in 2,5 layer PROOF fabric

Haglofs Proof Logo at Ultralight Outdoor Gear|PROOF™ 2,5 layer 100% Polyamide, soft dobby stretch weave face fabric, PU membrane and a protective H-print instead of a backer, 87 g/m², bluesign® approved. Hydrostatic head: >10.000 mm, Moisture permeability (inverted cup): >20.000 g/m²/24h
Haglofs PFOA logo at Ultralight Outdoor Gear|

Many of our fabrics are treated with durable water repellent (DWR) to keep you dry, warm and clean for longer. Where it is possible without compromising the high level of functionality of our garments, we use more environmentally friendly DWR treatments.

C6 DWR (PFOA free) DWR treatment is completely free from perfluorooctanesulfonic acid (PFOS) and has a significantly reduced content of perfluorooctanoic acid (PFOA) and has excellent functionality while causing less harm to the environment.

Haglofs Take Care logo at Ultralight Outdoor Gear|

At Haglofs we have great awareness of our impact on both nature and people. Our overall sustainability policy is simple: We minimise our negative environmental impact by developing long-lasting products, by using a sustainable production process and by continuously increasing the proportion of recycled and bluesign approved materials used in our products.

The Take Care logo indicates a product which is Bluesign approved or using recycled materials.

Haglofs Bluesign logo at Ultralight Outdoor Gear|The Bluesign standard is an environmental scheme aimed at removing any substances that are potentially hazardous to human health or the environment from the entire textile supply chain.
|Click here for more info on Haglofs, product updates and New Season information.

Haglofs Proof fabric is a 2.5 layer fabric designed with high breathability and a 40 denier face fabric, it has a matt finish and is quite soft to the touch. Just in case you weren't aware the L.I.M stands for 'Less is More' and is used to identify Haglofs products which have been designed to be very lightweight.

The fabric has a modest one-way stretch, this will enhance the fit rather than enhance movement. Haglofs L.I.M Proof pants achieve ultra-lightness by minimising features. There are no zips at all so you won't get them on over your boots. All the weight is in the fully waterproof breathable material.

- Reviewed by Ultralight Outdoor Gear

  • Made of a weft stretch waterproof/breathable 40D 2.5 layer PROOF fabric
  • PFOA-free DWR treated surfaces
  • Elasticated waist
  • Articulated knees and seat
  • Elasticated tapered lower leg to avoid excess material and for perfect fit
  • Rear hanging loop
  • Small size weighs 176g
  • Medium size weighs 180g
  • Large size weighs 184g
  • XLarge size weighs 188g
  • Fabrics: PROOF 2.5 layer 100% Polyamide, soft dobby stretch weave face fabric, PU membrane and a protective H-print instead of a backer, 87 g/m2, bluesign approved
  • Hydrostatic head: >10.000mm, moisture permeability (inverted cup):> 20.000 g/m2/24h


Care Instructions: HAGLÖFS PROOF™

Washing instructions: Always follow the washing instructions on the care label inside the garment. Do not use fabric softener. Always close zippers and any velcro straps before washing. It is preferable to dry garments in a drying cabinet as tumble dryers may cause greater wear. Adding heat during drying reactivates the DWR (Durable Water Repellent) treatment on the fabric surface. The same effect can be achieved by ironing the garment on low heat. Be sure to check the care label; not all garments tolerate drying in cabinet or dryer.

Miscellaneous: PROOF™ consists of a membrane that is laminated onto a face fabric. The material is completely waterproof, windproof and has very good breathability. Drip drying your PROOF™ garment without the addition of heat may impair water-repelling qualities. It is also important to re-waterproof the entire garment, or exposed areas, when the outer surface is being soaked by water already in light rain. Use a re-waterproofing agent that is suitable for 'breathable' garments. Only re-waterproof clean garments. Adding heat after re-waterproofing your garment, by tumble drying or ironing at low temperature, will maximize the effect of the new DWR.

Be the first to review Basement - Haglofs L.I.M Proof Pants. Write a review ›