Lightwave t30 Hyper XT Tent

4 Season / 3 Person / Fabric Inner / Height: 116cm, Length 225cm / Single Entrance
Weighs 2600g (excl pegs & bags)
Code: 3093
  • Now £649.99
  • (FREE UK & EU Delivery)
  • RRP £699.99
  • |
  • Save: £50.00 (7%)
+ in Stock Now | Usually dispatched within 24 hours
Loading...

Launched in 2012, Lightwave’s hyper range has been developed specifically for use where low packed weight and robust all-weather performance are paramount. The hyper tents are light enough to carry on extended wilderness treks, and strong enough to withstand the worst conditions where alternative shelter is not an option.

The hyper range offers three major performance innovations:
1. Hyper tents are completely multi-pitch. In other words, they can be erected flysheet-first, inner-tent first, or integrally.
2. Even though the flysheet fabric is silicone-coated on both sides, the flysheet seams are factory-taped making them fully weather-proof.
3. Hyper poles are fully maintainable in the field. Should any sections fail, they are easily removed and replaced with the spares provided with each pole set.

The fabrics used in the hyper tents strike a calculated balance between strength and weight (any thinner yarn or lower fabric weight, and fabric strength would be seriously compromised). For guylines, hyper tents use a Dyneema/polyester cord that is 80% lighter than standard nylon. Each tent comes with a range of different pegs to cover all ground conditions, from hard-packed earth to loose sandy soil.

The Hyper range of tents are designed for wilderness trekking, lightweight back packing and adventure travel. They are all multi pitch tent so they can be erected flysheet-first, inner-tent first, or integrally. Even though the flysheet fabric is silicone-coated on both sides, the flysheet seams are factory-taped making them fully weather-proof. The hyper poles are fully maintainable in the field. Should any sections fail, they are easily removed and replaced with the spares provided with each pole set.

The fabrics used in the hyper tents strike a calculated balance between strength and weight (any thinner yarn or lower fabric weight, and fabric strength would be seriously compromised). For guylines, hyper tents use a Dyneema/polyester cord that is 80% lighter than standard nylon. Each tent comes with a range of different pegs to cover all ground conditions, from hard-packed earth to loose sandy soil.

These multi pitch, tunnel tents are the back bone of the Lightwave tent range as they are light enough to carry on extended wilderness treks, and strong enough to withstand the worst conditions where alternative shelter is not an option.

Lightwave logo|Lightwave Tent Summary - We've summarised the key features of every Lightwave tent in one easy to read table - click the logo to go to that page.
Help and advice:
  • The Hyper tents are truly multi-pitch: they can be erected flysheet first, inner first or integrally.
  • The Hyper flysheets are silicone-coated on both sides and factory seam-taped for complete waterproofness.
  • The Hyper tents are extremely light for 4-season, all-weather, all-climate protection.

 

Flysheet:
  • Cut low to ground for full storm protection
  • Two front vents and one rear vent.
  • Factory-sealed seams

Inner Tent:

  • Single door with YKK #5 zip and mesh window.
  • Continuous colour-coded pole sleeves
Weight:
  • Flysheet weighs: 1135g
  • Inner tent weighs: 722g
  • Poleset weighs: 682g
  • Total weight excluding pegs: 2600g
  • All supplied pegs and accessories weigh 200g

Flysheet:

  • 48g/m2 30 d high-tenacity nylon 6.6 ripstop.
  • 5000mm silicone coating on both sides.
Groundsheet:
  • Tough 75 g/m2 taffeta fabric woven from 140-denier 6.6 ripstop nylon.
  • 7000mm 4-pass PU coating.
  • Bath-tub construction with reinforced corners and taped seams.
Inner Canopy:
  • Lightweight 35 g/m2 high tenacity 6.6 ripstop fabric woven from 430-denier nylon  
  • DWR Coating.
Poles:
  •  Yunan 8.64mm ultralight poles with unit connectors
Guylines:
  • 8 x 3.0 metres, 1.5mm Lightning guylines with Linelok adjusters
Pegs:
  • 6 x ultra-tough 16 cm square-section Lightning pegs
  • 4 x 16cm half thickness Lightning pegs
  • 4 x Wavelight pegs
  • 4 x  V pegs
  • Tent bag with accessories pocket, pole bag with reinforced base, pitching instructions
Other:
  • Colour: Forest Green
  • Packsize: 55 x 20cm
  • Tent bag with accessories pocket, pole bag with reinforced base, pitching instructions
Be the first to review Lightwave t30 Hyper XT Tent. Write a review ›
Top