Marmot Amp 2P Tent

3 Season / 2 Person / Mesh Inner / Height: 107cm, Length 221cm / Single Entrance
Weighs 1250g (excludes pegs & bags)
Code: SS15486
  • Now £314.99
  • (FREE UK & EU Delivery)
Item out of Stock | Usually dispatched within 24 hours

Marmot's AMP tents combine a two skin living area with good head height with a weight saving single skin foot end to provide a spacious tent that's still light.

Marmot says: This semi-freestanding tent is low on weight and big on room. Constructed with one wide-open door with single vestibule for storage, the Amp 2P features a twin tip floor design, sealed seams, durable fabrics and plenty of inner storage.

Marmot's AMP tents have all the volume at the front of the tent, where you want to live, and limited volume at the foot end to save weight. The main area is two skin whereas the foot end is single skin. The whole thing works very well because there isn't the condensation issues that you can sometimes get from single skin tents.

Both the AMP 2 and AMP 3 models have an unobstructed doorway and are therefore quite easy to get in and out of, the pole structure ensures that the maximum head height is maintained over quite a large area.

The floor plan is quite generous given the weight of the tent and you can set it up with a footprint and flysheet for a minimalist shelter.

- Reviewed by Ultralight Outdoor Gear


Help and advice:
  • Unique Semi-Freestanding Design reduces weight while providing spacious headroom
  • Marmot Volume optimising structure provides more Livable Space
  • Strategic clip placement provides larger interior volume
  • Fly vent and large foot vent provide good high/low ventilation
  • Colour coded easy pitch clips and poles
  • Lampshade pocket securely holds your headlamp to provide ambient light
  • One D Shaped Door
  • One Vestibule
  • Seam Taped Catenary Cut Floor
  • Seam Taped Full Coverage Fly with Vents
  • Interior Pockets for Small Gear Organization
  • Light-Reflective Points
  • Jingle-Free Nylon Zipper Pulls
  • Can Be Used with Bare Bones Setup


Tent Care

  • If necessary, use a sponge and warm water to clean your tent. If the entire tent requires cleaning, wash in a large bathtub of cold water, but do not soak the tent for an extended period of time.
  • Do not use hot water, bleach, dishwashing soap or detergent to wash the tent. If needed, a mild, non-detergent based soap can be used to clean the tent.
  • Do not use a washing machine or dryer to clean your tent. This can remove the waterproof coating.
  • To dry the tent, either pitch it in the shade, or hang it on a line to dry. Be sure the tent is completely dry before storing it.
  • Inner weighs 562g
  • Poleset weighs 296g
  • Flysheet weighs 392g
  • Total weight excluding pegs and bags: 1250g
  • Includes 8 heavy pegs, tent guy rope and flysheet patch, all weighing 180g and all can be replaced with lighter versions.


  • Tent Floor Fabric: 40d 100% Nylon 2000mm W/R, F/R
  • Tent Canopy Fabric: 15d No-See-Um Mesh F/R
  • Tent Fly Fabric: 30d 100% Nylon Ripstop, Silicon/ PU 1800mm W/R, F/R
  • Tent Vestibule Area(s): 6.2 sq ft, 0.58 sq m
  • Tent Floor Area: 29 sq ft, 2.7 sq m
  • Tent Dimensions: 42 x 42 x 87in, 107 x 107 x 221cm
  • Tent Pole Data: 4 / DAC NFL 8.7mm
Be the first to review Marmot Amp 2P Tent. Write a review ›