Trail Designs 12-10 Meths Stove
|
 |
The 12-10 alcohol stove was specifically designed to perform in the lower oxygen/higher heat environment found inside the Caldera/Ti-Tri cone systems.
It is a "center burn" design where air comes in the holes you see along the outside and the flame comes out the larger hole you see on top.
It is made of aluminum re-use materials and has no moving parts to wear out or break down. The 12-10 is designed for denatured alcohol only (UK; thats Methylated Spirit). This is a readily available fuel that can be found in any hardware or paint store and at many backcountry outfitters.
This stove is intended to be used primarilly with the Caldera/Ti-Tri systems, but can used in conjunction with your own pot stand and wind screen as well.
Our Verdict
Made from re-cycled drinks cans so they still have the can artwork on them. A superb burner with minimal weight, you really do need a windscreen for this type of stove - and in the case of this one you need a pot support as well.
If you already have a Caldera cone stove and you've sat on the burner - then buy this as a replacement.
Specification
- Tuned to work in all Caldera or Ti-Tri Cones
- Made out of recycled material
- Integrated primer pan
- Center burn design
- Weighs 16g / 1.5 oz
|
