|
|
Trail Designs
Products
Trail Designs 12-10 Meths Stove
The 12-10 alcohol stove was specifically designed to perform in the lower oxygen/higher heat environment found inside the Caldera/Ti-Tri cone systems. It is a "center burn" design where air comes in the holes you see along the outside and the flame comes out the larger hole you see on top.
Stove weight 16g / 0.5 oz
|
|
Trail Designs Caldera Caddy for Caldera Cone stoves
If you bought your Caldera Cone Stove before the Caddy was invented then here's an opportunity to bring your stove up to date - the caddy gives excellent protection for the cone, which otherwise is difficult to carry and the two halves of the Caddy can be used as mugs or eating bowls.
Small Caddy weighs 76g / 2.6oz
|
|
|
Cost: £14.99
 |
|
Cost: £6.49
 |
|
Cost: £37.00
 |
|
Cost: £37.00
 |
|
Cost: £37.00
 |
|
Cost: £37.00
(This item is currently out of stock. e-mail or call us for stock date)
 |
|
Cost: £37.00
 |
|
Cost: £37.00
 |
|
Cost: £37.00
(This item is currently out of stock. e-mail or call us for stock date)
 |
|
|
|
|
Trail Designs Caldera Keg F Stove System
The Caldera Keg is the lightest, most stable, wind resistant, and efficient cooking system you can buy. There is a good chance that the pot/stove/cone combination weighs less than your watch!
Weight of Pot/Cone/Stove - 2.7oz / 77g
|
|
Cost: £37.00
 |
|
Cost: £37.00
 |
|
Cost: £66.49
(This item is currently out of stock. e-mail or call us for stock date)
 |
|
|
|
Trail Designs Gram Cracker Solid Fuel Kit
The Trail Designs Gram Cracker is a Solid Fuel Kit for use with the awesome Caldera Cone systems. This kit provides a controllable solid fuel solution for your Caldera Cone cooking needs, delivering better fuel economy than an alcohol stove, while heating more efficiently that traditional solid fuel methods!!!
Stove weight 3g / 0.1oz
|
|
Trail Designs Ti Tri stove with Inferno Insert and Baseplate for MSR Titan Kettle
The brand new Inferno Ti-Tri cook system is a combination of the Ti-Tri system above along with a revolutionary inverted cone called the Inferno. The Inferno Insert and grate system, when used in conjunction with the Caldera Ti-Tri facilitates better air flow and a much cleaner, more complete incineration for your wood fire. In addition to the lower grate system providing air flow under your fire, it also directs additional fresh air above your fire providing an "afterburner" effect giving you more complete combustion.
Total weight of complete set with all parts: 292g / 10.3oz
|
|
From: £6.49
 |
|
Cost: £11.50
 |
|
Cost: £119.99
(This item is currently out of stock. e-mail or call us for stock date)
 |
|
|
|