FREEFLOW Ultralite

- 31g/m2 ultra-lightweight coated Nylon rip-stop

- Waterproof to a minimum of 1600mm of hydrostatic head with a minimum MVTR of 4000g/m2/24hrs

FREEFLOW Nailhead

- 160g/m² nylon with NailHead durable weave
- Waterproof to a minimum of 20,000mm hydrostatic head with a minimum MVTR of 10,000g/m²/24hrs
- 3 layer construction with brushed Tricot lining

FREEFLOW H2O

- 43g/m super lightweight coated 20 dernier Nylon mini ripstop

- Waterproof to a minimum of 1300mm and breathable to an MVTR of 6000g/m2/24hrs.

PEAQ Down

- 30g/m2 Ultra lightweight Nylon 6.6 plain weave

- Durable water resistant finish

- Fast drying and highly breathable

- Ideal lining fabric for active use garments

- Exceptional comfort against skin

PEAQ 60W

- 60g/m 100% Polyester
- Treated to be durably Water Repellent
- Exceptional comfort next to skin

PEAQ Air

- Lightweight nylon rip-stop
- Water repellent
- Wind resistant
- Extremely breathable
- Ideally suited to areas where maximum breathability is key such as Enhanced Breathing Panels (EBP)

PEAQ Micro

- 49g/m2 extremely lightweight Nylon 6 rip-stop
- Breathable to 92%
- Dense weave gives a wind resistance of 0.3cm2/sec
- Water repellent with a spray rating of grade 4

ENTRANT DT

- 66g/m² , 2.5layer, 15 denier 100% nylon with internal 'mesh' print.

- Minimum Moisture Vapour Transmission Rate MVTR of 8,000g/m²/24hrs.

- Waterproof to a minimum of 10,000mm hydrostatic head.

POLARTEC Classic Micro Grid / Jersey
- 175g/m 100% Polyester Single sided velour grid / jersey
- Warmth with minimal weight
- Highly breathable and quick drying
- Comfortable next to skin

POLARTEC Power Dry
- 194g/m Polyester knit with Spandex yarns and brushed inner face
- Excellent 4 way stretch

- Capillary action moisture movement away from the skin
- Highly breathable and quick drying

- Soft feel for comfort against the skin

POLARTEC Classic 100
- 175g/m 100% Polyester Single sided velour grid / jersey
- Warmth with minimal weight
- Highly breathable and quick drying
- Comfortable next to skin

POLARTEC Classic Micro
- 100% recycled Polyester

- 213g/m Polyester knit, brushed both sides

- High warmth to weight ratio

- Dries quickly

- Soft feel for comfort against the skin

POLARTEC Thermal PRO with HARDFACE Technology

- 335g/m 100% Polyester Hardface Jersey / Pebbled Velour with DWR
- Textured surface provides water resistance and increased durability
- Highly breathable and quick drying (Hardface)

- Surface fusion polymer application which increases abrasion resistance and enhances DWR without reducing breathability.

POLARTEC Thermal PRO Lightweight Jersey

- 213g/m 100% Polyester Jersey / Velour
- Provides mechanical stretch and warmth with minimal weight
- Highly breathable and quick drying
- Increases abrasion resistance
- Enhances durable water repellency
- No reduction in breathability

POLARTEC® Windpro® Stretch with Hardface® Technology (87% RECYCLED)
- 299g/m² 87% RECYCLED Polyester / 13% Spandex® knit
- Textured Hardface® Technology provides water resistance and increased durability
- Warmth with minimal weight and 4 times more wind resistant that traditional fleece
- Highly breathable (Hardface®)

- Surface fusion polymer application which increases water resistance and enhances DWR without reducing breathability.

Polartec® Wind Pro® fabrics are extremely breathable yet provide 4x more wind resistance than traditional fleece.  This is the new "super fleece" which spans an incredibly wide range of conditions; performs as both outerwear and insulation; and offers exceptional durability.  This is a versatile fabric which can be worn all year long for a variety of activities.

How does it work?
Proprietary yarns and a very tight construction greatly reduce the effects of wind chill, the Achilles heel of traditional fleece.  We have proven its effectiveness both in the lab and in the field.  Polartec® Wind Pro® blocks the wind 4x more than traditional fleece.

The durable water repellent outer surface sheds rain and snow. Velour or pebbled back efficiently traps air and provides a high warmth-to-weight ratio.  Both surfaces of these fabrics are finished for maximum durability and pill-free performance. They retain their insulating ability and original appearance after repeated use and laundering.

Because it is not a laminate, Polartec® Wind Pro® is also highly breathable, maintaining 85% of the breathability of traditional fleece to keep you from overheating.

Technical Highlights

1) 4x more wind resistant than traditional fleece; greatly reduces wind chill
2) Provides warmth without the weight and bulk of traditional insulating fabrics
3) Water repellent surface sheds rain and snow
4) Highly breathable; provides comfort in all activities; does not restrict the movement of moisture vapor
5) Durable; will outlast other fleece fabrics
6) Machine washable
7) Versatile; appropriate for a broad range of activities

Polartec® Power Shield®  fabrics are the next generation of technical outwear - the soft shell.  This clothing concept goes beyond traditional 2-layer systems, which feature fleece insulation and a waterproof/breathable shell, to a single layer that protects against all but the worst weather conditions and delivers extended breathability, abrasion resistance and stretch to enhance your outdoor experience.

How does it work?
Polartec® Power Shield® fabrics feature a smooth, tightly woven nylon face for abrasion resistance equal or superior to the best shells, but without the stiffness and noise.  A polyester velour back traps air and provides a high warmth-to-weight ratio.

Polartec® Windbloc-ACT® enables the fabric to block 98% of the wind. The remaining 2% is allowed to circulate within the fabric, which greatly enhances moisture vapor transmission –2 times faster than other waterproof breathable shells – and improves breathability, reducing the risk of heat stress buildup.

All Polartec® Power Shield® fabrics are finished with a durable water repellent (DWR) to shed rain and snow. All versions feature spandex or mechanical stretch for freedom of movement.

Garments made from Polartec® Power Shield® fabrics are designed to replace traditional fleece and shell systems for most outdoor clothing applications, reducing the weight and number of layers needed to insulate and protect. They are ideal for skiing, snowboarding, winter climbing and back-country trekking.They are used in jackets, pants, bibs, hats,and gloves.  It's outerwear that gets worn, not carried.

Technical Highlights

1) Extremely abrasion resistant face for long lasting durability; fabric maintains its form and function regardless of abrasive contact
2) Blocks 98% of the wind to prevent wind chill,but allows enough air to circulate to keep you from overheating
3) Water repellent surface sheds rain and snow
4) Highly breathable; resists heat stress buildup during action sports
5) Non-restrictive fit allows full range of motion
6) Provides warmth without the weight and bulk of traditional insulating fabrics
7) Creates less noise than a traditional shell
8) Machine washable.

POLARTEC Hardface Technology

Provides extreme durability and abrasion resistance in an exceptionally breathable and water resistant fabric.

- Dramatically increases abrasion and snag/pick resistance

- Enhances Durable Water Repellency

- Maintains a uniform after-wash appearance

Provides permanent Odour protection by inhibiting the growth of odour causing bacteria in the fabric using silver fibre yarn.

- Safe and natural. Pure silver is the active ingredient in Odour Resistant Technology

- Silver fibres inhibit the growth of odour causing bacteria in the fabric

- Provides permanent odour protection for the life of the garment. Garments stay fresher, longer between washes.

Rain and snow bead up and run off the surface of the fabric. Offers protection from surprise changes in the weather and enhances dry time.

- Sheds rain and snow

- Quick Drying

Pertex Equilibrium Stretch

- 146g/m2 Nylon 6.6 / LYCRA

- Unique 'denier gradient' structure creates permanent capilliary action where sweat and rain always travels to the outer surface.

- Wind-resistant and water repellent, shedding light rain and snow.

- Soft, natural feel, but it is impressively durable.

Pertex Microlight Ripstop

- 49g/m very lightweight Nylon 6.6 rip-stop weave
- Breathable to 98%
- Dense weave gives a wind resistance of 5ft/min
- Water repellent with a spray rating of grade 5

- 55g/m very lightweight Nylon 6.6 rip-stop weave
- Breathable to 98%
- Dense weave gives a wind resistance of 5ft/min
- Water repellent with a spray rating of grade 5

- 52g/m very lightweight Nylon 6.6 rip-stop weave
- Breathable to 98%
- Dense weave gives a wind resistance of 5ft/min
- Water repellent with a spray rating of grade

PERTEX Endurance fabrics have one main objective - to provide maximum protection from moisture.

Pertex®Endurance fabrics are coated with a microscopic thin layer of hydrophobic material. This layer is so thin that it hardly adds any weight, nor does it affect the softness of the material considerably. One thing we learned from sleeping outside is that your bag tends to get wet. Pertex®Endurance fabrics have one main objective - to provide maximum protection from moisture.

This works both ways:

Key Benefits

- 85g/m super lightweight, 20 denier nylon 66 mini rip-stop
- Waterproof to a minimum of 30,000mm hydrostatic head with a minimum MVTR of 17,000g/m/24hrs
- Laminated to oleophobic, air permeable hydrophobic ePTFE

General Properties

eVENT® Fabric is a Direct Venting™ waterproof barrier that marks a significant advancement in ePTFE laminate technology. Using proprietary and patented Dry System™ technology, eVENT® Fabric sets a new standard for comfort by allowing perspiration to dissipate and vent without saturating the inside of the fabric.

At the core of eVENT® Fabric is an ePTFE (expanded Polytetrafluoroethylene) film that has been rendered oil-repellant, and thereby free from body-oil contamination, via a method that retains both the inherent open-pore structure of the membrane as well as its hydrophobic properties.

The eVENT® family of fabrics are the smartest choice for athletes and adventurers who need and demand the highest possible performance and comfort from their apparel and footwear.

Most importantly, eVENT® Fabric presents an improvement you will actually feel.

eVent Lightweight 3 Layer

- 122g/m2 high tenacity soft textured Nylon mini ripstop
- Waterproof to a minimum of 30,000mm hydrostatic head with a minimum MVTR of 27,000g/m2/24hrs
- Laminated to oleophobic, air permeable hydrophobic ePTFE and Nylon Tricot

General Properties

eVENT® Fabric is a Direct Venting™ waterproof barrier that marks a significant advancement in ePTFE laminate technology. Using proprietary and patented Dry System™ technology, eVENT® Fabric sets a new standard for comfort by allowing perspiration to dissipate and vent without saturating the inside of the fabric.

At the core of eVENT® Fabric is an ePTFE (expanded Polytetrafluoroethylene) film that has been rendered oil-repellant, and thereby free from body-oil contamination, via a method that retains both the inherent open-pore structure of the membrane as well as its hydrophobic properties.

The eVENT® family of fabrics are the smartest choice for athletes and adventurers who need and demand the highest possible performance and comfort from their apparel and footwear.

Most importantly, eVENT® Fabric presents an improvement you will actually feel.

eVent Lightweight Abrasion 3 Layer

General Properties

eVENT® Fabric is a Direct Venting™ waterproof barrier that marks a significant advancement in ePTFE laminate technology. Using proprietary and patented Dry System™ technology, eVENT® Fabric sets a new standard for comfort by allowing perspiration to dissipate and vent without saturating the inside of the fabric.

At the core of eVENT® Fabric is an ePTFE (expanded Polytetrafluoroethylene) film that has been rendered oil-repellant, and thereby free from body-oil contamination, via a method that retains both the inherent open-pore structure of the membrane as well as its hydrophobic properties.

The eVENT® family of fabrics are the smartest choice for athletes and adventurers who need and demand the highest possible performance and comfort from their apparel and footwear.

Most importantly, eVENT® Fabric presents an improvement you will actually feel.

eVent Storm 3 Layer

General Properties

eVENT® Fabric is a Direct Venting™ waterproof barrier that marks a significant advancement in ePTFE laminate technology. Using proprietary and patented Dry System™ technology, eVENT® Fabric sets a new standard for comfort by allowing perspiration to dissipate and vent without saturating the inside of the fabric.

At the core of eVENT® Fabric is an ePTFE (expanded Polytetrafluoroethylene) film that has been rendered oil-repellant, and thereby free from body-oil contamination, via a method that retains both the inherent open-pore structure of the membrane as well as its hydrophobic properties.

The eVENT® family of fabrics are the smartest choice for athletes and adventurers who need and demand the highest possible performance and comfort from their apparel and footwear.

Most importantly, eVENT® Fabric presents an improvement you will actually feel.

eVent Hurricane 3 Layer

General Properties

eVENT® Fabric is a Direct Venting™ waterproof barrier that marks a significant advancement in ePTFE laminate technology. Using proprietary and patented Dry System™ technology, eVENT® Fabric sets a new standard for comfort by allowing perspiration to dissipate and vent without saturating the inside of the fabric.

At the core of eVENT® Fabric is an ePTFE (expanded Polytetrafluoroethylene) film that has been rendered oil-repellant, and thereby free from body-oil contamination, via a method that retains both the inherent open-pore structure of the membrane as well as its hydrophobic properties.

The eVENT® family of fabrics are the smartest choice for athletes and adventurers who need and demand the highest possible performance and comfort from their apparel and footwear.

Most importantly, eVENT® Fabric presents an improvement you will actually feel.

Entrant Lightweight Dermizax EV Stretch 3 Layer

- 135g/m 100% Nylon
- Stretch tricot
- Treated with Kudos XR high performance DWR
- Waterproof to a minimum of 20,000mm hydrostatic head with a minimum MVTR of 16,000g/m/24hrs

CARVICO ATLANTA

- Durable nylon with 22% Xtra life Lycra for two-way stretch
- Provides correct muscle compression to reduce distribution of lactic acid, reducing fatigue
- UPF 40+ protection
- Meets Oeko-Tex standards for 'Confidence in Textiles', a reliable product label for consumers who specifically aim to buy textiles that are harmless to health

TMF Team Pad

- Made in Italy
- Multi-level pad with 5, 6 and 10mm foam
- Eschler developed top fabric
- Depressed seams for long-term comfort
- www.tmfcyclingpad.com

CORDURA Mini Rip

- 160g/m2 high tenacity Nylon Cordura rip-stop

- Breathable to 98%

- Excellent tear strength and abrasion resistance

- Dense weave gives wind resistance of 9ft3/min

- Water repellent